Home › Web Security › OWASP Top 10
OWASP Top 10
The 2021 categories mapped to concrete bug classes, tests and remediations.
▶ Here to build, not read? Jump to the Hands-On Practice.
Prerequisites: Web Application Architecture · HTTP for Security Testing
Overview
The 2021 categories mapped to concrete bug classes, tests and remediations. In one line: OWASP top 10 decides where trust is placed, and misplaced trust is where the security problem lives. That's the theory you need — the understanding comes from doing it, so the walkthrough below is the heart of this chapter.
How it works
Mechanically, OWASP top 10 comes down to three things: what data is trusted, where it crosses a boundary, and what happens on the other side. The diagram traces that path; you'll walk it for real, step by step, in the practice below.
flowchart TD
A["OWASP Top 10"] --> B["Concepts & terminology"]
A --> C["Internal mechanics"]
C --> D["Trust boundaries"]
D --> E["Attack surface"]
D --> F["Defensive controls"]
E --> G["Detection & telemetry"]
F --> G
G --> H["Verification in the lab"]
- Trust boundary — where data or control passes between components of different privilege or trust.
- Attack surface — the set of points an attacker can interact with.
- Primary control — the single measure that most reduces this technique's impact.
- Telemetry — the log or signal a defender uses to detect the technique.
Hands-On Practice
🧪 Lab setup — Web Security
bWAPP— http://localhost:8081 — 100+ web bugs, best for targeted practiceDVWA— http://localhost:8082 — adjustable security levelsJuice Shop— http://localhost:8083 — modern SPA, full OWASP Top 10WebGoat— http://localhost:8084 — guided lessons
# web-lab/docker-compose.yml — Web Security part environment
services:
bwapp:
image: raesene/bwapp
ports: ["8081:80"]
networks: [labnet]
dvwa:
image: vulnerables/web-dvwa
ports: ["8082:80"]
networks: [labnet]
juice-shop:
image: bkimminich/juice-shop
ports: ["8083:3000"]
networks: [labnet]
webgoat:
image: webgoat/webgoat
ports: ["8084:8080"]
networks: [labnet]
networks:
labnet:
driver: bridge
# routed here so your browser/Burp on the host can reach the apps;
# for a jeopardy-style setup put the attacker box on labnet and set internal: trueUses the Web Security lab environment.
Guided walkthrough
# bring up the part environment, then confirm you can reach `bWAPP` from KaliExpected output
Target reachable; you have a clean starting point.# perform the core owasp top 10 technique step by step against bWAPPExpected output
You observe the expected effect and can repeat it reliably.# inspect logs / responses / process or network activityExpected output
You can point to exactly where and why it worked.# implement the single most important fix for this techniqueExpected output
Repeating the technique now fails.Live terminal
labserver/README.md), then click Connect lab runner and paste the token. Until then, copy commands from the walkthrough and run them in your own Kali terminal.
Try it yourself
Challenge 1. Extend the walkthrough with one variation of the owasp top 10 technique and predict the result before running it.
Hint
Change one variable (payload, target, or control) at a time.
Solution
Answers vary — the goal is a correct prediction confirmed by observation.
Challenge 2. Find and apply a second defensive control for owasp top 10 and show it also blocks the technique.
Hint
Think in layers: prevention, detection, and least privilege.
Solution
Any independent control that breaks the chain counts — name why it works.
Challenge 3. Write a one-paragraph report of your owasp top 10 test mapped to CWE/ATT&CK and the fix.
Hint
Structure: finding → impact → evidence → remediation.
Solution
A defender should be able to act on your report without asking you anything.
Detect & defend (blue-team view)
- Re-run the technique while watching your telemetry — attack and detection are two views of one event.
- Turn what you observed into a detection rule (Sigma/YARA) and confirm it fires without flooding.
Skills check
You can move on when you can, without notes:
Check Yourself
Quick self-test — answers hidden. If you can't answer without notes, redo the relevant walkthrough step.
Q1. In one sentence, what security problem does OWASP Top 10 address or create?
Show answer
OWASP Top 10 matters because its behaviour determines where trust is placed; misplacing that trust is the root of the associated bug class.
Q2. Name one trust boundary involved in OWASP Top 10 and what crosses it.
Show answer
Any point where attacker-influenced data meets privileged processing — e.g. user input reaching an interpreter, or a token reaching a verifier.
Q3. Give one attack against OWASP Top 10 and the single control that most reduces its impact.
Show answer
State the attack precisely, then the primary control (validation, encoding, isolation, authentication, or least privilege) — not a laundry list.
Interview angles
- Walk me through how OWASP Top 10 works, then tell me where you would attack it.
- How would you detect OWASP Top 10 being abused in an environment you defend?
- What is the difference between mitigating and eliminating the risk associated with OWASP Top 10?
Pitfalls & Best Practice
Common mistakes
- Treating OWASP top 10 as a checkbox instead of understanding the mechanism — defences copied without comprehension fail silently.
- Trusting client-side or default controls to enforce a server-side security property.
- Testing only the happy path and never the abuse cases or malformed input.
- Fixing the symptom (one payload) instead of the class (the missing control).
Do this instead
- Push security decisions to a single, well-tested enforcement point rather than scattering checks.
- Fail closed: when in doubt, deny and log, so misconfiguration reduces access rather than expanding it.
- Instrument the trust boundaries so the same event is visible to offence (as a target) and defence (as a signal).
- Validate your understanding of OWASP top 10 empirically in the lab before trusting it in production.
- Prefer safe, high-level APIs and secure defaults over hand-rolled primitives.
Reference
MITRE ATT&CK Mapping
| Technique | ID |
|---|---|
| ATT&CK technique | T1190 |
OWASP Mapping
CWE Mapping
| CWE | Weakness |
|---|---|
| CWE-79 | XSS |
| CWE-89 | SQL Injection |
| CWE-287 | Improper Authentication |
| CWE-352 | CSRF |
| CWE-918 | SSRF |
CAPEC Mapping
- No single attack pattern; see the CAPEC chapter to map behaviour to patterns.
CVE References
- No canonical CVE for a concept page. Search the NVD for concrete instances when studying real cases.
NIST References
- NIST CSRC Publications — search for the control family or guide relevant to this topic.
RFC References
- No governing RFC for this topic. Where a protocol is involved, its RFC is linked from the relevant networking chapter.
Research Papers
- Reflections on Trusting Trust — Ken Thompson, 1984
- Smashing the Stack for Fun and Profit — Aleph One, Phrack 49, 1996
- The Protection of Information in Computer Systems — Saltzer & Schroeder, 1975
Books
- The Web Application Hacker's Handbook, 2nd ed. — Stuttard & Pinto
- Real-World Bug Hunting — Peter Yaworski
- The Tangled Web — Michal Zalewski
- Web Security for Developers — Malcolm McDonald
Official Documentation
Related Chapters
- Web Application Architecture
- HTTP for Security Testing
- Cookies
- Session Management
- Web Authentication
- Authorization
Part of the Web Security section of Cybersecurity-Mastery. 🟢 Beginner · ~60 min hands-on · Last updated 2026-08-12.